How To Fix A Toilet That Keeps Running

How To Fix A Toilet That Keeps Running – Get a stronger flush and a lower water bill. Find out how to fix things if your toilet keeps running.

Each editorial product is independently selected, although we may receive a fee or affiliate commission if you purchase something through our links. Ratings and prices are accurate and items are in stock at time of publication.

How To Fix A Toilet That Keeps Running

Introduction Learn a simple four-step strategy that solves 95 percent of toilet flushing problems. Stop water running constantly, encourage flushing, and solve other common problems quickly and easily.

Reasons Your Toilet Isn’t Working (and How To Fix Them)

The basics of how a toilet works haven’t changed much in the last 80+ years. After flushing, the water fills the tank and raises a float that shuts off the water when it reaches a certain level. The lever still opens the valve to cause flushing and returns to its position when the water level drops.

So it should come as no surprise that we still have to deal with the same common flushing problems from time to time. Sometimes the flush is not strong enough, sometimes the toilet still works, and sometimes the bowl does not fill.

The good news is that most of these problems are easy to fix, without replacing the toilet bowl. You can complete the first three steps in five minutes. This will solve most problems. And the fourth step is usually easy, but not always. More on this later. These steps work for most toilets, but not for pressure-assisted models. Here’s what to do if your toilet won’t stop working.

For a toilet overflow pipe problem, remove the tank cap and locate the fill pipe. This is the small flexible pipe that goes from the fill valve to the toilet bowl overflow pipe. As the tank refills, this pipe sprays enough water down the toilet overflow pipe to refill the bowl after the flush is complete. If this tube falls off or the water stream misses the overflow tube, the bowl will not fill and your next flush will be mushy (that is, it will not develop a strong siphon).

Unclog Your Toilet Without A Plunger: The Ultra Easy, Mess Free Method

Reattach the fill tube and press it firmly onto the fill valve. Make sure it is about 1 inch above the edge of the overflow pipe and that the fill pipe is sending water to the toilet overflow pipe. Flush the toilet bowl and watch the water flow to make sure it goes down the toilet bowl overflow pipe.

The water level in the tank is controlled by an adjustable float. A float set too low produces a weak coil; if it is set too high, water will overflow into the toilet bowl overflow pipe and the fill valve will not close. The toilet continues to work. To find out how to fix a toilet that won’t flush, find the fill level mark on the inside of the tank and mark it on the toilet overflow pipe so you can easily see it. If you can’t find it, measure about 1 inch on the overflow pipe and mark.

Then run the water in the toilet bowl and see if the water reaches that mark and stops. If it is not and the toilet continues to run, adjust the drive force of the toilet bowl up or down. If you have an old toilet, you will need to bend the brass rod that connects to the flush ball to make the adjustments. But with newer toilets, you usually turn the screw or pull the clip along the rod. Flush the toilet after each adjustment. Continue adjusting the float until the water closes at the correct level.

Also, make sure the water level is at least one inch below the C-L (critical level) marked on the fill valve. You can adjust the height of many valves to raise or lower C-L. Sometimes the fill valve just won’t close, which means it’s faulty. If so, close the water supply at the valve under the tank. Buy a replacement valve. You don’t have to fit the old one; many, like the one shown, fit most toilets. The change is 15 minutes.

Self Cleaning Toilet Technology

A chain that is too short or tangled will not allow the valve to close and water will continue to leak into the container. This causes the fill valve to cycle on and off to refill the tank. A chain that is too long or a flush rod hitting the tank cap will not open the valve wide enough to stay open for a full flush. You will find that you have to hold the lever to complete a good flush.

To avoid low water in the toilet bowl and other problems, adjust the link in the chain so that it leaves only a small amount of slack when the valve is closed. Trim the excess chain on the bar to leave only about an inch of excess to reduce the possibility of tangling. Then replace the tank cap and make sure the flush lever does not hit the cap when you press the lever. If so, bend it slightly and adjust the chain.

If you have completed the first three steps and the toilet is still running, chances are you have a worn out valve. To learn how to prevent a toilet from overflowing, turn off the water, remove the old valve, and take it to the store to find the exact replacement. (Iron shops often have a large selection.) Most valves snap over ears on the overflow pipe. Others have a ring that slides over the tube.

Now it’s waiting. You may not find an exact match. The range of flapper styles has grown over the past 15 years, and you can find 15 to 20 flapper options on the store shelf. Some packages include specific make and model information (so check yours before you leave home). Others are marked “universal flapper”. If you can’t find an exact replacement, try the one closest to you and choose the universal type. They’re cheap, and an extra one could save you another trip to the grocery store! (Avoid “customizable” types unless you’re modifying adjustable ones.)

How To Fix A Kohler Toilet That Keeps Running

Install the new valve and make sure it opens and closes freely. Then test it. If the toilet is running or running intermittently, you are not sealing properly. Try a different valve if the toilet doesn’t stop working.

If you just can’t find a valve that seals, consider replacing the entire toilet overflow pipe/valve. On most (two-piece) toilets, this means removing the tank. It’s not difficult and you don’t need any special tools. It will take you about an hour, and you will avoid that expensive call to the plumber.

We no longer support IE (Internet Explorer) as we strive to provide a web page experience for browsers that support new web standards and security practices. Do you often hear sounds coming from your toilet? Do you see the water running down the bowl long after the rinse? This is called flush toilet and is a big expense on your water bill.

But don’t panic—fixing a working toilet is one of the easiest repairs you can do yourself. We scoured the web and spoke with hardware expert Nathaniel Garber, owner of Garber Hardware, a family-owned West Village hardware store that’s been in business since 1884, to give you the lowdown on how to fix your toilet.

Next By Danco Hc660 Hydroclean Water Saving Toilet Fill Valve With Cleaning Tube

First, lift the lid of the container and take a look inside. If the water level is unusually low and leaking through the rubber valve at the bottom, you will need to replace the valve, which can be purchased at any hardware store for $5 to $15. The constant flow of hard water and bacterial growth in the toilet bowl can wear down the valve so that it hardens and no longer fits properly on its valve seat.

A faulty valve causes the vast majority of toilet flushes. However, if you see that the water level in the tank is high and is instead leaking into the overflow pipe at the top, you actually need to replace the fill valve. This rarely happens, but it can also cause the toilet to run – to learn how to replace the fill valve, watch these video instructions here and here.

Most of the time, however, it’s that flapper problem. The first thing you need to do is locate the water valve behind the toilet bowl and turn it clockwise and turn off the water supply.

Then open the lid of the tank and flush the toilet until the water finally drains out of the tank. Once the tank is empty, or as empty as it can be, reach over to the valve and separate its rubber grips from the overflow tube studs.

Common Toilet Problems

Take your old valve to a nearby hardware store and ask an experienced employee to find a new valve that matches your toilet model. Most flaps come in a universal and adjustable size, but different brands sometimes have special requirements.

After getting a new valve, wipe any dirt or bacteria from the valve seat with a cleaning cloth. Slide the rubber flap handles onto the plastic pins, align them with the valve seat, and place the lift chain back on the spool lever, leaving about half an inch of slack in the string. If necessary, adjust the chain.

Turn the water valve behind the toilet again and let the tank refill with water. Let the water fill to about an inch below

Toilet keeps running how to fix, how to fix toilet that keeps running after flush, toilet keeps running fix, how fix a toilet that keeps running, how to fix a toilet that keeps running after flushing, how to fix a toilet fill valve that keeps running, how to fix a dual flush toilet that keeps running, fix toilet that keeps running, how to fix an american standard toilet that keeps running, fix a toilet that keeps running, how to fix a toilet that keeps running water, how to fix a toilet that keeps running